T-MAT X9500 Bedienerhandbuch PDF herunterladen

1. For best results, fill any cracks or potholes prior

to installation of T-MAT

2. Clean pavement surface of debris or vegetation.

3. Thoroughly mix product. Drill and paint mixers

will provide the best mix.

4. Start at the highest point and work your way down.

5. Apply with a squeegee using a back and forth

motion, overlapping the previous pull by 70%.

6. Block or cone off area to prevent traffic on the

wet surface.

7. Stay off until completely dry (2-4 hours). Keep car

traffic off for at least 12 hours, however 24 hours

is recommended.

8. Temperature must be 60°F

period after installation. Do not install if rain is

imminent. High humidity can increase dry times.

or rising for a 24 hour

Seite 1

1. For best results, fill any cracks or potholes prior to installation of T-MAT 2. Clean pavement surface of debris or vegetation. 3. Tho

Weitere Dokumente für Nein T-MAT X9500

Keine Kommentare